- If very few or no DTCs and recommendations are
- If too many DTCs or recommendations are listed, try
- To be sure that you are only working with your
- Warning Lamps (red)
- Warning Messages (in Message Center)
- Status Lamps (yellow)
Click above link if you want a laptop ready with all soft installed with cable
The kit above comes without laptop and need to do own install but have insturctions supplied
Land Rover vehicle lines.
Support for X100, X150, X202, X250, X350, X351, X400 Jaguar vehicle lines.
Jaguar vehicle lines.
IDS was used by Jaguar dealerships for vehicles manufactured pre-2005. Land Rover also used IDS however the interface we can only supply will only work with the Jaguar side of IDS.
The user interface does look dated compared to the newer SDD however it is still a very reliable piece of software that is still used in the Jaguar dealerships through out.
Our IDS software is only suitable for Jaguars pre-2005, it is not suitable for any Land Rover pre 2005.
It allows you to do the following:Fault Code Reading / Resetting analysing for repairs
SDD is the latest development by JLR in vehicle diagnostics. Designed to be easy to use and extremely efficient in fault finding. Conventional diagnostic systems read fault codes and offer them to the end user. It is then upto the the end user to analyse the codes and find the vehicle fault from the data that has been provided.
SDD instead asks the end user the fault with the vehicle and progresses to analyse the fault codes and offers the solution to fix the vehicle on a relevance to likely ratio.
Should you wish to intervene and only see the fault codes then this option is open to the end user but keep in mind, SDD was developed to recommend the repairs.
Alongside diagnostics the service functions allows vehicle and module programming and vehicle customisation.
A selection of what can be done with SDD:
While it is easy to distinguish between a Warning Message and a Warning Lamp that is currently active, if the problem is intermittent, the service writer must determine through careful questioning of the customer if a warning lamp, warning message, or both were displayed. Also, not every MIL is considered a Warning Lamp since some indicators on the instrument cluster are used to indicate the status of a system. Examples of Status Lamps include the Passenger Seat Occupancy Status Lamp and the TPMS Status Lamp. Using the Passenger Seat Occupancy Status Lamp as an example: this light is only used to indicate the status of the passenger seat. When lit, it simply indicates that the SRS system has determined that based on the current inputs, the passenger restraints will not be deployed. It does not mean the system has detected a failure that requires a driver warning. For this reason, the lamp is classified as a Status Lamp. Similarly, the amber TPMS indicator is used to inform the driver that the tire pressure requires attention. While this light may remain lit when a system malfunction exists, it is considered a Status Lamp since its primary function is to inform the driver of the tire pressure status. Recommendation: When selecting SDD symptoms for lamps that are primarily considered a Status Lamp, but are also known to have a secondary function as a Warning Lamp, be sure to select the symptoms under both categories in the symptom selection map.
New Diagnostic Process
IDS has been updated with the goal of providing a clear diagnostic strategy and tool navigation path to the technician. With Symptom Driven Diagnostics (SDD), the technician is able to begin the diagnostic process by identifying the specific symptoms of a customer concern using Symptom Maps incorporated into the
SDD software. A diagnostic strategy can then be structured around only the DTCs that are relevant to those symptoms. SDD can also provide links to other service information to support the diagnostic process.
Symptom Maps are incorporated into the SDD software, and allow the technician to target DTCs and diagnostic routines based on a specific set of symptoms. Symptom Maps are organized by major vehicle system as follows:
Maps are then further structured by System and Sub-System details to provide lists of possible symptoms at 2 levels.
Symptom Maps are used by SDD in conjunction with DTCs. In order to ensure the best possible recommenda- tions to achieve FRFT repairs,
the technician must input ALL vehicle symptoms that match the customer concern.
The Integrated Diagnostic System (IDS) core architecture dates from 1999 and incorporates elements going back as far as 1995. In the meantime,
vehicle technology has become more complex and the number of vehicle variants has increased.
Current vehicle systems support up to 4,000 different Diagnostic Trouble Codes (DTCs), which increases the complexity of diagnostics.
The technician now needs to diagnose systems, not merely individual components.
Without a clear strategy for a repair process, a technician faced with up to 40 DTCs at the start of an IDS session can easily lose confidence in the diagnostic tool.
Feedback data from dealerships shows inconsistent methods of fault diagnosis with under utilization of the IDS capabilities.
This has resulted in high ‘No Fault Found’ repair rates, difficulty in achieving Fixed Right First Time (FRFT) repairs, and an increase in the time that a customer’s vehicle is off the road.
Another version of software on the USB is
Vehicle Model Compatability
L319 LR3 Full compatibility
L319 LR4 Full compatibility
L320 RR Sport Full compatibility
L322 RR Full compatibility excluding viewing data logger signals on 2006MY variants
L359 LR2 Full compatibility
X150 XK Full compatibility
X100 XK Full compatibility excluding flashing/programming modules
X250 XF Full compatibility
X200 S Type Full compatibility
X351 XJ Full compatibility
X350 XJ Full compatibility
X308 XJ Full compatibility excluding flashing/programming modules
X300 XJ Full compatibility excluding flashing/programming modules
XJS Full compatibility excluding flashing/programming modules
X400 X TYPE Full compatibility
We offer a no quibble 1 year warranty on our cables. If there is any issue we will replace or repair the cable at no cost. Simply send the cable to our warranty claims address along with a copy of your invoice if possible to: